-Use Supports   1.00000
-Use Sierras   0.00000
-Use Separators   0.00000
-Use Braces   0.00000
-Use Solid Braces   0.00000
-Opening Height   0.12000
-Opening Bottom Width   0.12000
-Separator Height   0.0000
-Use Gussets   0.00000
-Use Projected Edges   1.00000
-Support Interior Perims   1.00000
-Line Spacing   0.30000
-Supported Cutaway   0.05000
-Minimum Angle  25.00000
-Minimum Area   0.00100
-Top Contact   0.019685
-Top Space   0.1181
-Top Height   0.147625
-Top Intersect   -0.01
-Point Intersect   0.00000
-Bottom Contact   0.019685
-Bottom Space   0.17715
-Bottom Height   0.03937
-Bottom Intersect   0.0001
-Minimum Brace Width   0.000
-Minimum Top Brace Width   0.0000
-Brace Width   0.0000
-Brace Interval   20.00000
-Minimum Base Width   0.0
-Minimum Part Height   0.0000
-Use Enhancing   1.00000
-Unsupported Inset   0.0
-Double Edge Distance   0.0000
-Use Flags   0.00000
-Use Gusset Sierras   0.00000
-Mixed Mode   1.00000
-Gusset Angle  45.00000
-Maximum Gusset Length   1.00000
-Minimum Gusset Length   0.10000
-Top Sierras Intersect   0.1000
-Top Sierras Height   0.000
-Side Sierras Intersect   0.000
-Side Sierras Height   0.000
-Maximum Pole Height   1.00000
-Resolution   1.00000
-Use Scaffold   0.00000
-Scaffold Extra X   0.0000
-Scaffold Extra Y   0.0000
-Scaffold Extra Z   0.00000
-Support Bottom   0.00000
-Grid Size  10.00000
-VTC Normal   0.40000
-Extents Check   1.00000
-Merge Regions   1.00000
-Remove Overlapping   1.00000
-Remove Self Supporting   0.00000
-Subtract Regions   1.00000
-Sort Regions   1.00000
-Partially Supported Test Length   0.01000
-Min Width For Triangle Inclusion   0.00010
-TR Display Limit  -1.00000
-Z Compensation   0.00000
-Brace Push Up   0.00000
-Ignore Close Cad Vertices   0.00000
-Support Lowest Perimeter Only   0.00000
-Lowest Perimeter Support Tolerance   0.05000
-Ignore Enclosed Regions   0.00000
-XHatch   0.00000
-YHatch   1.00000
-XHatchSpacing   0.20000
-YHatchSpacing   0.20000